VW & Audi A6 Front Camera Fault C1107 02 – Video Line for Image Processing Signal Fault

In short: Fault code C1107 02 “video line for image processing, signal fault” on VW and Audi A6 usually points to a defect in the front camera or its internal signal processing. Lane keeping assist, traffic sign recognition or high beam assist then fail. The original camera can be repaired in many cases – at Compramas for a fixed price of €220.

Is fault code C1107 02 – “video line for image processing, signal fault” stored on your VW or Audi A6 in the image processing control unit? Then there may be a defect in the front camera or the camera's internal electronics and signal processing.

The front camera is part of various driver assistance systems and processes important image information from the area in front of the vehicle. If the camera fails, several assistance functions may be restricted or completely deactivated at the same time.

At Compramas you can have your existing VW or Audi front camera repaired. This often avoids the expensive replacement of the complete camera.

What does fault C1107 02 mean?

The fault code

C1107 02 – video line for image processing, signal fault

indicates a fault in the transmission or processing of the front camera's video signal.

In this case, the image processing control unit does not receive a correct signal from the camera or detects faulty signal transmission.

With the fault known to us, the cause may lie within the front camera electronics.

The fault occurs, among others, on VW vehicles and the Audi A6.

Typical symptoms of a faulty front camera

A defect in the front camera can show itself through different symptoms. Several faults often occur at the same time.

Typical signs are:

• fault code C1107 02
• video line for image processing – signal fault
• front camera not working
• fault in the image processing control unit
• no or faulty communication with the front camera
• driver assistance systems fail
• warning message about assistance systems in the instrument cluster
• lane keeping assist not working
• traffic sign recognition fails
• high beam assist not working
• camera intermittently not working
• fault can be cleared and then reappears

Which assistance systems are actually affected depends on the vehicle equipment and the camera system fitted.

Why do several assistance systems fail at the same time?

The front camera provides its image information to several driver assistance systems.

Depending on the vehicle and equipment, the following systems, among others, may use the camera data:

• lane keeping assist
• Lane Assist
• traffic sign recognition
• high beam assist
• other camera-based driver assistance systems

If the front camera or its image signal fails, this information is no longer available. As a result, several assistance systems may display a fault message at the same time.

This does not necessarily mean that all affected assistance systems are faulty individually. The common cause may be the front camera or its internal signal processing.

Fault C1107 02 on the Audi A6

The fault C1107 02 video line for image processing signal fault also occurs on the Audi A6 with a corresponding front camera system.

Possible symptoms on the Audi A6 include, for example:

• Audi front camera not working
• fault C110702 in the image processing control unit
• lane keeping assist failed
• traffic sign recognition not available
• high beam assist not working
• several assistance system warning messages
• sporadic or permanent camera failure

With such a fault, a new Audi front camera does not automatically have to be fitted. Depending on the defect, the existing original camera can be repaired.

Fault C1107 02 on VW

The fault C1107 02 can also occur on various VW vehicles with camera-based driver assistance systems.

A fault in the video line or image signal of the front camera is often stored in the fault memory.

Typical search terms for this fault include, for example:

• VW front camera faulty
• VW front camera C1107 02
• VW video line image processing signal fault
• VW driver assistance camera faulty
• repair VW front camera
• VW Lane Assist camera faulty

As VW fits different camera systems depending on model, model year and equipment, compatibility must always be checked using the actual part number.

Does the front camera have to be replaced completely?

Not necessarily.

If the internal electronics or signal processing are faulty, the existing original front camera can be repaired. In many cases this avoids replacement with a new camera.

With driver assistance cameras in particular, a new part can involve considerable costs. Costs for coding, adaptation and calibration may also be added.

A professional front camera repair for C1107 02 can therefore be an economical alternative.

Possibly affected part numbers

The repair service may be suitable for front cameras with the following part numbers or reference numbers, among others:

4H0 907 217 F / 4H0 907 217 / Bosch 0 203 500 018 / 1039S64552

4G0 907 217 A / 4H0 907 217 / Bosch 0 203 500 004 / 1039S64552

4G0 907 217 F / 4H0 907 217 / Bosch 0 203 500 018 / 1039S64557

4G0 907 217 A / 4H0 907 217 / Bosch 0 203 500 004 / 1039S61349

The numbers stated are for guidance only.

What always matters is the part number on the front camera actually fitted. Vehicle model and model year alone are not enough for a clear match.

If your part number is not listed, you can send us a photo of the type plate or the camera before ordering.

Having your front camera repaired – how it works

1. Select the right repair

In our online shop, select the corresponding VW or Audi front camera repair for fault C1107 02.

Be sure to compare the part number beforehand.

2. Remove the front camera

The camera must be removed from the vehicle professionally.

As the front camera is part of safety-relevant driver assistance systems, removal should be carried out by a suitably qualified workshop.

3. Send the camera to Compramas

Pack the front camera carefully and with sufficient padding.

Please enclose the complete order documents and, if possible, an exact fault description.

Helpful details include, for example:

• vehicle manufacturer
• vehicle model
• model year
• part number of the camera
• fault code C1107 02
• existing warning messages
• failed assistance systems

4. Diagnosis of the front camera

After receipt we carry out a professional diagnosis and fault analysis.

This checks whether the stated fault is present and whether the front camera can be repaired.

5. Feedback on the test result

After the diagnosis we inform you about the test result and the next steps.

6. Repair and return shipping

After approval, the fault area is repaired and your own original front camera is then sent back to you.

Does the front camera need to be calibrated after the repair?

Depending on the vehicle, camera system and removal and installation situation, a calibration or basic setting of the front camera may be required after refitting.

Calibration ensures that the camera captures its surroundings correctly and that the connected driver assistance systems work properly.

This work must be carried out with suitable diagnostic or calibration equipment by an appropriately equipped specialist workshop.

What should be checked before sending it in?

Before the front camera is sent in, it should be ensured that the cause does not lie outside the camera.

The following, among other things, should be checked:

• power supply of the front camera
• ground supply
• connectors
• wiring
• communication with the control unit
• visible external damage
• other fault codes in the vehicle

If the external components are fine and fault C1107 02 persists, there may be a defect inside the camera or its signal processing.

Requirements for a repair

The front camera should be sent in complete and in its original condition.

The following in particular can be problematic:

• severe mechanical damage
• water damage
• fire damage
• severe corrosion
• missing components
• cameras that have already been opened
• previous improper repair attempts

Whether the unit can ultimately be repaired can only be assessed after the front camera has been received and tested.

Have your Audi A6 and VW front camera repaired at Compramas

Compramas specialises in the repair of electronic vehicle components and driver assistance systems.

For fault symptoms such as:

• C1107 02
• Video line for image processing signal fault
• Audi A6 front camera faulty
• VW front camera faulty
• front camera not working
• driver assistance system failed
• Lane Assist not working
• lane keeping assist failed
• traffic sign recognition not working
• high beam assist failed

a repair of the existing original camera can be an economical alternative to replacement with a new component.

If you have questions about VW front camera repair, Audi A6 front camera repair or the compatibility of your part number, you can reach us at:

05671 / 7664710

Have your front camera repaired now

Fixed price €220 incl. VAT, 12-month warranty, free shipping within Germany: VW front camera repair · Audi A6 front camera repair

All services for driver assistance systems: Driver assistance systems